Angier and northern Harnett
Rapid growth near the Wake line means many newer homes with PEX plumbing and modern fixtures. Early failures tend to be valves, supply lines and water heater components.
24/7 emergency plumbing for Johnston, Wake and Harnett counties24/7 emergency plumbing
(919) 792-8705Cape Fear country, from Angier down to Dunn
Harnett County sits just south of Wake and west of Johnston, straddling the Cape Fear River. It has some of the fastest-growing communities in the region around Angier, while Lillington, Coats, Erwin and Dunn keep their long-standing small-town roots.
Towns we serve
Local plumbing, local knowledge
Plumbing in Harnett County often means a mix of town water and private wells, a lot of septic, and homes ranging from historic Dunn mill-era houses to brand-new subdivisions along NC-55 and NC-210.
We serve Harnett County along NC-55, NC-210, US-401, US-421 and I-95, including Angier, Lillington, Dunn, Coats and Erwin.
Rapid growth near the Wake line means many newer homes with PEX plumbing and modern fixtures. Early failures tend to be valves, supply lines and water heater components.
The county seat and surrounding areas include a broad range of housing ages, from older homes with crawl spaces to newer construction on slab.
Historic neighborhoods in Dunn and Erwin often have older drain lines and mature trees. Rural homes around Coats may rely on wells and septic, which changes how we troubleshoot drains and pressure.
Harnett Regional Water serves much of the county, alongside some town systems, while many rural properties use private wells and septic. Hard water and sediment are common complaints on well systems and worth keeping in mind for water heater maintenance.
Burst pipes, overflowing fixtures, sewage backups and sudden loss of water, handled any hour of any day.
Slow sinks, stubborn tubs and main line backups cleared properly, with camera inspection when the cause is not obvious.
No hot water, rusty water or a leaking tank. Repairs, replacements and tankless conversions sized for your household.
From a dripping supply line to a burst pipe in the crawl space, found and fixed before it turns into rot or mold.
Main water service leaks, low pressure, root-damaged sewer laterals and broken lines between the house and the street.
Faucets, toilets, disposals, shower valves and appliance hookups installed cleanly and connected to last.
The next five minutes
These steps are safe for most homeowners and limit damage while help is on the way. Your safety comes before your floors.
Call (919) 792-8705Close the fixture valve if the leak is at one sink or toilet. Otherwise close the main shutoff, usually where the water line enters the house, in the crawl space, a utility closet, the garage or near the water heater. On a well, you can also switch off the well pump breaker.
Keep clear of standing water near outlets, cords or appliances. Only switch off a breaker if you can reach the panel while standing somewhere dry. If you are unsure, stay out of the area.
If the heater is leaking, close its cold supply valve and turn off the breaker (electric) or set the gas control to off (gas). If you smell gas, leave the house first and call your gas utility or 911 from outside.
Call (919) 792-8705. While you wait, move valuables and electronics up and away, catch drips, and take photos for your insurance company.
Our Harnett County focus is Angier, Lillington, Dunn, Coats and Erwin. For addresses farther west, including the Spring Lake and Anderson Creek areas, call to confirm before scheduling.
Yes, with the plumbing inside the house and the lines leading out. If the septic tank or drain field is the problem, we will tell you and recommend calling a septic contractor.
Yes. Emergency calls are answered 24 hours a day, 7 days a week across our service area.
(919) 792-8705, answered 24/7 for Angier, Lillington, Dunn, Coats, Erwin and surrounding communities.